Form No. 8A (Prescribed under Rule 56A) REPORT OF EXAMINATION OF WATER-SEALED GASHOLDER 1. Name of occupier of factory. 2. Situation and address of factory. 3. Name, description, distinguishing number or letter and type of gasholder. 4. Name and address of the manufacturer. 5. (a) No. of lifts. (b) Maximum capacity in cub-meters (cub. ft.) (c) Pressure thrown by holder when full of gas. 6. Particulars of gas to be stored in the holder. 7. Particulars as to be condition of- (a) Crown (b) Side sheeting, including grips and cups. (c) Guiding Mechanism (Roller carriages, rollers, pins, guide rails or ropes.). (d) Tank. (e) Other structure, if any (columns, framing and bracing). 8. Particulars as to position of the lifts at the time of examination. 9. Particulars as to whether the tank and lifts were found sufficiently level for safe working and if not, as to the steps taken to remedy the defect. Inserted Vide Notification No. F. 16. (12)/63-Lab. Dated 21-5-69. 10. Date of examination and by whom it was carried out. 11. Condition of vessel. (1) external. (2) internal. 12. Are all fittings, appliances properly maintained and in a good condition repairs, if any, required and period within which they should be execute and any other condition which the person making the examination thinks it necessary for safe working. 13. Other observations. I certify that on the gasholder described above was thoroughly examined and such of the tests as were necessary made on the same day and that the above is a true report of my examination. Signature …………………………………………………… Qualification ……………………………………………… Address …………………………………………………….. Date ………………………………………………………….. If employed by a Company or Association ……………………………………………………give name and address. | 
