APPENDIX NOTIFICATION Dated the April, 1969 No. F. 11 (32) /58 I & L :.- In exercise of the powers conferred by sub-section (3) of Section 26 of the Factories Act, 1948 read with the Government of India, Ministry of Labour & Employment Notification No. S. 0.108, dated 14thFebruary,1958, the Chief Commissioner, Delhi hereby makes the following amendment to the Delhi Factories Rules, 1950, the draft of which was published with his Notification of even number dated 10th July, 1958 - AMENDMENT In the said Rules, 53 the following rule shall be inserted, namely - 53-A.- The provisions of sub-section (2) which prohibit the sale or letting on hire of certain machines of Section 26 of the Act shall extend to the class or description of machines specified in the first column of the Schedule suspended to this Rule. (2) No machine specified in the firs t column of the Schedule above mentioned shall be sold or let on hire by any person for use in any factory after the date of bringing these rules in force unless it is constructed or provided with guards, fencing or other protective devices in confirmity with the requirements set opposite to the class of description to which the machine belongs in the second column of the said Schedule. (3) Provision under these rules shall not be deemed to relieve any occupier or manager of a factory of his responsibilities under Section 21 of the Factories Act, 1948. SCHEDULE Requirements as to the construction and safeguards or machines First Column | | Second Column | Class or Description of Machines | | Requirements | Blowing Room Machinery. | 1. | (a) Beater covers and the door immediately over the dirt grid shall be fitted with an automatic looking arrangement which renders it impossible to open the covers while the beater is still running, or to restoge the machinery until the doors have been closed. | | | (b} The covers over the porcupine cylinders shall be fitted with an automatic, looking arrangement which renders it impossible to open the covers while the cylinders are still running or to restart the machinery until the covers have been closed. | | 2. | The nip between the cage wheels and cylinder wheels shall be efficigintly protested on all machines. Guards shall be provided extending round the cutte edge of both the wheels. | | 3. | Projecting ends of beater shafts shall be respectively covered. | | 4. | Spiked or fluted rollers on hand fed craspers or lattices on breakers and openers shall be so covered as to prevent access to intake. | | 5. | Exposed toothed garding on all machines shall be securely covered, | | 6. | On lap forming southechers with weighing rollers the lap roller shall be so protected that as soon as the weights are ran down the lap roller as completely covered. | | | 1. All feed roller wheels, doffer and narrow wheels, side shuft wheels, cylinder wheels roller wheels, and, all tacthed gearing inspite the Boiler head shall be securely covered. | | | 2. All cylinder doors shall be fitted with an automatic leading Section which will prevent the door from being opened until the cylinder has ceased to receive, to restart the machine until the door has again been closen. | | | 3. Licke-it shall be completely covered and the covers shall be screwed down so that they cannot readily be lifted while the machine is in motion. | | | 4; Over the deferr, covers shall be extended as far as is reasonably practicable. | | | 5. All driven pulleys shall be plated. | | | 1. Exposed toothed gearing on all machines shall be securely covered. | | | 2. On all machines the lap forming rollers shall be provided with a guard or cover which shall either. | | | (i) Prevent access to the intake of the lap roller and fluted roller so long as the weighing rack is down, or | | | (ii) Prevent access to the intake of the lap roller and fluted roller and be so locked that the guard or cover cannot be raised until the machine is stopped and the machine cannot be started until the guard of cover is closed. | Combers. | 1. | Exposed toothed gearing on all machines shall be securely covered. | | 2. | The toothed gearing in side the coiler head shall be securely covered. | | 3. | The cylinder shall be provided with a guard or guards which shall prevent access too it whilst in motion and the guard or guards shall be so locked that they cannot be raised until the machine cannot be started until all guards have been closed and locked. | Drawing Frames. | 1. | The roller gearing shall be effectively covered and the cover shall be so locked that it cannot be raised until the machine is stopped and the machine cannot be started until the cover is closed. | | 2. | The undershaft of the frame shall be covered and the pulley on the undershift shall be plated. | | 3. | All toothed gearing and shafts connected with the driving of the roller and sliver cans shall be securely covered. | | 4. | The callender roller gears shall be provided with guards independent of the cylinder roller cover and the coils cage and coiler head shall be covered. | Speed Frames. | 1. | All jack boxes shall be fitted with automatic locks which shall prevent the doors being opened while the machinery is in motion and shall rends it impossible to restart the machine until the door has been closed. | | 2. | Draft change wheels, back roller and carrier wheels twist and carrier wheels, bobbin shaft driving wheels and swing wheels, lifter wheels and botton cone drum wheels shall be securely covered. | | 3. | The bobbin skew gear wheels shall either, | | | (i) Be covered over the top, and their total enclosure be completed by up right metal plates extending at the back from the roller beam to the floor, and at the front from the cover over the top of the wheels to the floor and screen arranged as to from continuous screen at every position of the lifter rail; or | | | (ii) Be covered over the top and the covers be extended both in front and behind round the edges of the wheels to within not more than one quarter of an inch from the spindles. | | 4. | Spindle skew gear shall be effectively covered. | | 5. | Lifts rack wheels shall be securely covered, and the guard to be such that it will effectively protected the nip both as the rail wishes and as it falls. | | 6. | All balance weights shall be wast with cyclets forming part of the weights themselves. | Ring and Throstle Frames | 1. | All toothed gearing such as headstock wheels draft wheels and these driving the lifting gear shall be securely covered. The guard covering the draft pinion wheels shall be so locked that the cover cannot be raised until the machine is stopped and the machine cannot be started until the cover is closed. The outer and of the frame shall be filled in with metal plates. | | 2. | On machines with double tin rollers a guard shall be fitted along the whole length of the nip between the rollers. | Winding Frames. | 1. | Traverse motion and mangle rotion wheels shall be effectively covered. | | 2. | Where there is a double tin roller the nip, shall be provided with a guard. | | 3. | Bevel wheels driving spindles of Jambo cop winding frames shall be effectively covered. | | 4. | Exposed toothed gearing on all types of machines shall be effectively. | Warping | 1. | Bevel wheels on all warping machines shall be effectively covered. | | 2. | All toothed gearing on chain beaming, winding on machines and other types of winging machines shall be effectively covered. | Clay Pans and fize Beeks. | 1. | . All toothed gearing and shafting connected therewith shall be effectively guarded. | Taping Machine. | 1. | The distance between the perifery of the smaller and large cylinders shall not be less than six inches and where this distance is less than six inches the nip shall be effectively guarded. | | 2. | The following dangerous moving parts shall be effectively covered. | | | (a) Bevel wheels on side shaft. | | | (b) Bevel wheels and upright shaft for driving coloured or top box. | | | (c) Measuring motion wheels. | | | (d) Speed change gears. | | | (e) Intake of drag and measuring rollers. | | | (f) Linder at end of dry taping machines | Looms :- | 1. | To prevent shuttle flying out when the loom is running the sley of the loom shall be provided with guard. It is to be fitted as low as possible so that the clearance between the guard and the shuttle when the shuttle is placed on the fall of the cloth with the loom crank shaft on the top centre does not exceed ½ inches and on 1ooms other than velvet looms or looms of 60 inches reed space between the guard and the sample shall not be less .than 5/8 inch unless the guard is so designed and constructed as to prevent injury from trapping between them. | | | The guard shall extend to at least half the shuttles length from the spindle stud belt on overpick looms, or the trash plate on underpick looms. | | 2. | Between the hammer head/ and the beam there shall be space of not less than 3/4 inches unless the hammer head always extends over the breast beam. | | 3. | Duck bills on all loose reed looms shall be effectively protected. | | 4. | All gearing including tappet and twill motion wheels shall be completely encased. On small and similarly barral motions the top and bottom pairs of bevel wheel and that portion of Shaft connecting them which above the warp shall be effectively covered | | 5. | There shall be a space of not less than one inch left between the connecting rode driving the dobby and the framework of the look, and between the stay and the picking stick and picking stick and framework a space of not less than two inches. | Plaiting Machines. | 1. | All the toothed gearing including the gearing driving the bottom shaft shall be effectively covered. | | 2. | At the delivery and between the knife and the card bar a guard shall be provided. | | 3. | Side arms shall be effectively covered. | Shearing and cropping Machines. | 1. | All revelling knives shall be fitted with covers so as to prevent access thereto whilst the machine is in motion and when possible, the covers shall be so locked that no one of them can be raised until the machine is stopped, and the machine cannot be started until all the covers are closed. | | 2. | All the exposed toothed gearing shall be effectively covered. |
Subs. vide Notification No. F.11 (32)/58-19 L Dt. April, 59. (TO BE PUBLISHED IN DELHI GAZETTE PART.- IV EXTRAORDINARY) GOVERNMENT OFNATIONAL CAPITAL TERRITORY OF DELHI (LABOUR DEPARTMENT) 5.SHAM NATH MARG. DEHI No. P.27 (53)/CIF/2002/Lab./ NOTIFICATION No. P.27 (53)/CIF/2002/Lab./ 139 In pursuance of the provisions of sub-rule (1) of rule 65 of the Delhi Factories Rules, 1950, the Lt. Governor of the National Capital Territory of Delhi, is pleased to direct that Rules 65 to 70 of the said Rules shall apply to factories specified in the Schedule below, with effect from the expiry of three months form the date of publication of this notification in the official Gazette. SCHEDULE S.No | Description of Factories | 1. | M/s Orient Craft, B-16, Okhla Industrial Area, Phase.- II, New Delhi.- 110020. (FD. No.7677 | 2. | M/s Anand International, A-191, Okhla Industrial Area, Phase-I, New Delhi.- 1100 | 3. | M/s Orient Craft, F-23/3, Okhla Industrial Area, Phase-II, New Delhi.- 1100 | 4. | M/s Madan Trading Co. (P) Ltd., H-9, Block B-1, Mohan Co-operative Industrial Area Mathura Road, New Delhi-110044, (FD.No. 7368) | 5. | M/s Opera Global Pvt. Ltd., D-12/2, Okhla Industrial Area, Phase-II, New Delhi-1100 (FD. No. 10554) | 6. | M/s Anand International, Plot No.B-II/63, Mohan Co-operative Industrial Estate Mathura Road, New Delhi-110044. (FD.No.10048) | 7. | M/s Wear Eell (India) Pvt. Ltd., B-134, Okhla Industrial Area, Phase-1, New Delhi-
(FD.No.10458) | 8. | M/s Maya Export Corporation, B-127, Okhla Industrial area, Phase-I, New Delhi-1100 (FD.No.7937) | 9. | M/s Competent Automobiles Co. Ltd., Plot No. 3, Gazipur, Near Maharajpur.U.P.B Delhi-110092 (FD.No.9039) | 10. | M/s Century Overseas, 37, DLF Industrial Area,Kirti Nagar, New Delhi.- 1100
(FD.No.9165) | 11. | M/s Welspring Universal, B-19 Mayapuri Industrial Area, Phase-I New Delhi.- 11000 (FD.No.9219) | 12. | M/s Eastern Base, C-157 (2nd Floor), Mayapuri Industrial Area, Phase-II New Delhi.- 1100 (FD.No.9643) | 13. | M/S Karan Motors Pvt.Ltd., B-67, Mayapuri Industrial Area, Phase-I New Delhi-1100 (FD.No.7251) | 14. | M/s Hend Setters International, A-68, Mangolpuri Industrial Area, Phase-II Delhi 1100 (FD.No.9898) | 15. | M/s Rajindera Enterprises, T-5/250& 251, Mangolpuri industrial Area, Delhi – 110083 (FD.No.9249) | 16. | M/s Richa Knitwears. 36-37, Furniture block, Kiri Nagar, new Delhi 1100
(FD.No.7331) | 17. | M/s Mayur Overseas, D-164, Okhla Industrial AreaPhase-I New Delhi.- 1100
(FD.No.9856) | 18. | M/s Haldi Ram Marketing Pvt. Ltd. B-1/H-8, Mohan Co-operative Industrial Area Mathura Road, new Delhi.- 110044. (FD.No.7799) | 19. | M/s Gaurav International, A-3 Mangolpuri Industrial Area, Phase-II Delhi 1100
(FD.No.9389) | 20. | M/s Pragati Power Station (Pragati Power Corporation Ltd.) I.P. Estate, Ring Road New Delhi 11002 (FD.No.10519) | 21. | M/s L.M. Sagar Exports, B-237, Okhla. Industrial Area, Phase-I, New Delhi 1100
(FD.No. 9916) | 22. | M/s L.M. Sagar Export, B-48 (2nd & 3rd Floors). Okhla Industrial Area, Phase.- I Delhi.- 110020. (FD.No.9661) | | |
By order and in the name of the Lt. Governor of the National Capital Territory of Delhi (Vijay S. Madani Secretary (Labour) LABOUR DEPARTMENT Notifications Delhi, the 8th July, 2005 F. 27(11)/CIF/Lab/2003/2916..- In exercise of the powers conferred by Section 112 of the factories Act, 1948 (63 of 1948), read with Government of India, Ministry of Labour Notification No. S.O. 108 dated 14th February, 1958 and Ministry of Home Affairs Notification No. S.O. 2709 dated the 7gh September, 1966, the Lt, Governor of the National capital Territory of Delhi, after previous publication, hereby makes the following rules further to amend the Delhi Factories Rules 1950, namely:- RULES Short title, extent and commencement 1. (1) These rules may be called the Delhi Factories (Amendment) Rules, 2004 2. It extends to the whole of the National Capital Territory of Delhi. 3. It shall come into force with effect from the date of their publication in the Delhi Gazette. Amendment of rule 13: 2. In the Delhi Factories Rules, 1950 (hereinafter referred to as “the principal Rules”) in rule 13, after clause ©, the following clause shall be inserted, namely :- “(d) to direct by an order in writing to the occupier or the manager to produce either personally or through authorized agent any prescribed record or registers, at his office mentioned in the order”. Amendment of rule 63: 3. In the principal Rules, in rule 63 after para D, the following para shall be inserted namely “E Without prejudice to the generality of the provisions of Sub-section (3) of Section 45, every, first aid box or cupboard shall be kept under the charge of a person who is trained in first aid treatment and has a certificate of proficiency in the said treatment granted by St. John Ambulance Association or under the charge of any other person who holds a certificate in first-aid treatment recognized by the State Government”. |
